If you can't find the correct part, GB, the company that makes cable ties,
has 4" cable ties part # 45-104UVB and cable tie mounting bases part #
45-MBUVB. Find them in the electrical department. The mounting bases are
mounted by adhesive pads that I have found are a devil to pull back off.
I've never had one fail, but I use them in my office not in the hot
underhood environment. Prep the surface well. Might work -- cheap and
worth a try.
LAD
----- Original Message -----
From: "chuck" <cciaffone@verizon.net>
To: "spridget list" <spridgets@autox.team.net>
Sent: Thursday, June 21, 2007 5:04 PM
Subject: [Spridgets] WWOT -- Cable tie/mount needed
For my 97 honda rice burner -- there is a wiring harness that
runs along the front right wheel well and is secured to the
metal body parts by a set of (ugh!) plastic doofrangies.
They each push into a 1/4 inch hole and have a cable tie to
wrap around and cinch the cable bundle. They have broke.
I have tried Radio Shack, AutoZone, and Honda, and my
local mom&pop hardware emporium with no luck.
Where do I find these??
chuck
_______________________________________________
ladaniels@sbcglobal.net
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|