Sorry Dave. It is the screw for the handle to the lock, that I am
after. My mistake. These eyes are getting old.
SO, what I really need, y'all, is 2 screws for the handle to the
lock. Of course there is only 1 o na BE, but 2 on a Mini.
At least I need info to their whereabouts, or an accurate description
of threads, etc.
Peter C
===
At 03:47 PM 6/28/2007, David Woerpel wrote:
>Peter,
>
>I used some AN 10-32's I got off the B-25 we worked on. Been on the
>Bugeye for 27 years. Your referring to the 'garage door' latch
>the the T-handle fits into, right? My AKD3567 parts book, page BB
>3 Plate 2 shows it as illustration 33, part number PMZ
>0308. Enlighten me if I'm incorrect.
>Dave
>59 :{)
>59 MGA 1500
>05 MCS
>Burlington WI
>
>Peter C wrote:
>>Uh, if I may interrupt ...
>>
>>I could use 2 screws BMC number 6K9833 Besides being used on my
>>Mini door latches, they are also used on Bugeye/Frogeye bonnet
>>latches. As you can tell by the part number, they are not a
>>standard type item. The screws available for the BE application are
>>for the replacement latch gizmo. And no, I DFK if they are
>>Posi-pozi drive or not.
>>
>>So, anyone have 2 screws of the 4 used on a BE bonnet to attach the
>>latch bit that takes the handle? Accessible from behind the grille.
>>
>>Thanks
>>
>>Peter C.
>>
>>Lord, I pray my brakes are twice as good as the guy in front of me....
>>... and half as good as the guy behind.
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|