spridgets
[Top] [All Lists]

Re: [Spridgets] Thread Locker on Head Studs

To: "Spridget List" <spridgets@autox.team.net>
Subject: Re: [Spridgets] Thread Locker on Head Studs
From: "63AHBJ7" <63ahbj7@gmail.com>
Date: Wed, 8 Aug 2007 15:10:44 -0500
Almost all of your post is right on, Hal!!

<<APT and my machinist both say the studs should go into the block only a
little more than hand tight.>>

On the couple hundred motors I have done, I only use the tightest I can get
with my hand.  No prob in all these years!!  And with NOTHING on them!!
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>