spridgets
[Top] [All Lists]

Re: [Spridgets] Which Bushings?

To: "rrengineer@dslextreme.com" <rrengineer@dslextreme.com>
Subject: Re: [Spridgets] Which Bushings?
From: "Jim Johnson" <bmwwxman@gmail.com>
Date: Sun, 23 Sep 2007 14:08:07 -0500
Mike,

I'll be watching the answers here as well because I have the same
clunk in the rear of my Midget on both braking and acceleration. I
have already eliminated ( propeller shaft, u-joints...etc) all the
other possible sources other than the suspension bushings which appear
to be the originals and nearing 40 years of age. Since I have the car
up on blocks attm until I get time to dig a bit of metal out of the
pushrod tubes or where ever it went, I will probably just drop the
whole rear end and blast, paint and renew it all. What's everyones
feeling about the rear dampers and springs?  How can I tell if they
are worn out?

Cheers!!
Jim

On 9/23/07, rrengineer@dslextreme.com <rrengineer@dslextreme.com> wrote:
> With the 50th celebration coming I'm sure everyone is getting to some of
> the projects they have been putting off for their cars.  I am no
> exception.  I have a clunk in the front right side of my Bugeye when I hit
> the brakes for the first time after it has been sitting for a while.  I
> checked the kingpin assembly and the bearings and the brakes which all
> seem to be in good order.  The only suspect in this problem is the
> suspension bushings.  When I first assembled the car during the
> restoration I used rubber bushings from Moss.  These rubber bushings had
> no metal tubing bonded to the inner diameter like the originals.  They
> were just plain rubber.  O.K., so I didn't know any better.  It was my
> first time rebuilding a suspension.  Right now I have both the correct
> rubber (with the metal tubing centers bonded to the rubber) and
> polyurethane bushing sets to replace the old ones.  I have to make a
> decision.  My question is, who is using polyurethane bushings in their
> Spridget and who is using rubber bushings and why.  I'd like to know which
> you think is better and why.  If you have had both in your car,  what was
> the difference in ride quality, noise, etc. for a street car.
> Mike MacLean
> 60 Sprite
> 56 BN2
> _______________________________________________
> bmwwxman@gmail.com
>
> Edit your replies
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>


-- 
Cheers!!
Jim - 68 Midget in Dodge City
Don't miss 50 Years of Spridgets at Lake of the Ozarks, June 26-29, 2008!!
For info... http://www.Sprite-MidgetClub.org
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>