spridgets
[Top] [All Lists]

Re: [Spridgets] Frank's 67

To: spridgets@autox.team.net
Subject: Re: [Spridgets] Frank's 67
From: Frank Clarici <spritenut@comcast.net>
Date: Sun, 07 Oct 2007 20:17:29 -0400
It's home and mostly stripped out.
It is surprisingly straight and rust free except for the floor pans.
New ones will be coming very soon and that's about it for welding.
Very little body work is needed on this one so it should be painted in a 
couple weeks.
My only disappointment is that the car came with 2 1098s.
No 1275. So if anybody wants a 1098, come get it. 1 is a 10cc the other 
a 10cg. The 10cg turns over and is out of the car, the one in the car 
does not move (yet).
I also have a few too many dashboards for 65-67 Spridgets if anybody 
needs one.
I took a grinder to a couple of rust spots to find the few small holes 
were fixed with brazing, the rust was really just a bondo bubble at the 
two metals. The whole car was sanded down to bare metal and primed some 
time back so it's going to be a piece of cake to get it down to bare 
metal so I can do the right thing on the bad spots.
(Taco Bell wrappers :)
This one will NOT go concours, it has been hit in the rear but 
professionally repaired and there is a minor issue up front on one of 
the frame rails. I will not attempt to refix the rear crash because I 
don't think I can do better than what was done, I will clean it up a 
touch on the inside of the trunk but it will never be perfect.
I was lucky to not have heeps of coon crap but there is spider shit on 
the car and I found the skeleton in the closet, a dead mouse and his 
condo in the heater system. He left his deposits under the pedal box.
All in all, I think I did OK.
I only need to know one thing.....
Why do POs insist on taking a pair of dykes to things like oil pressure 
tubes, temp gauge lines, and wire harnesses?

-- 
Frank Clarici
Toms River, NJ
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>