spridgets
[Top] [All Lists]

Re: [Spridgets] oil pres relief nut

To: "Spridgets" <spridgets@autox.team.net>
Subject: Re: [Spridgets] oil pres relief nut
From: "Glen Byrns" <grbyrns@ucdavis.edu>
Date: Tue, 9 Oct 2007 09:01:06 -0700
That would explain why the 1"open end wrench works so well on that cap.

Glen

> My notes say it miked 9/16 whitworth.  which is  1.010  
> inches,--------------------Bob C
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>