According to Vizard (3rd ed., p 167):
12A185 was an early "S" casting, coded "yellow." It should have 1.4"
intakes and 1.15" exhaust. But it may have 1.218" ex. The text is a bit
confusing. If it has the larger ex valves you will want to check for cracks
between the valves. It is also (apparently) a big bore head, thus not
original to your 9CG engine.
Hal
-----Original Message-----
From: spridgets-bounces+hal=katemuir.com@autox.team.net
[mailto:spridgets-bounces+hal=katemuir.com@autox.team.net]On Behalf Of
Jack Laird
Sent: Saturday, December 22, 2007 1:47 PM
To: spridgets net
Subject: [Spridgets] Todays LBC content, question
I just bought an engine and gearbox, complete and running with all
assesories,
when pulled last year, with the number 9CG-DA-H23732 and the cylinder head
12A185.
I understand what the engine number means. It came from an Midget MK I,
close
ratio gears, high compression, 9.1. My question is that head, seems it is a
Cooper S head is it not?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|