At 06:14 PM 1/6/2008, Brad Fornal wrote:
>If you own a two wiper, 1968 Sprite or Midget, might I ask for a favor. I
>need a decent photo or two, of the clutch line routing. I have pulled "old
>smokey" out of the Sprite, as I FINALLY got a call from Curto, telling me
>the carbs left NYC Friday. While I was looking under the bonnet area, I see
>that the clutch line isn't fastened down, and looks like it was replaced at
>some point. I would like to get it fastened back down correctly, and run
>where it belongs.
>All photos would be greatly appreciated.
>
>Thanks,
>Brad
======
Brad, the 1/4"line as used on 1275s are 55" long (LHD) and so run in
front of the heater tray. (7/16-20 thread single, or bubble flare both ends)
Peter C.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|