spridgets
[Top] [All Lists]

Re: [Spridgets] HS2 Float Lid Question

To: "David Ambrose" <stargazer1@cox.net>, "Spridgets List"
Subject: Re: [Spridgets] HS2 Float Lid Question
From: "Paul Asgeirsson" <PAsgeirsson@worldnet.att.net>
Date: Wed, 16 Jan 2008 22:00:26 -0800
Stuck float, dirty seat, bad needle??  Not closing allowing fuel out  
the overflow..

I'm not the right guy either!

Pa



----- Original Message ----- 
From: "David Ambrose" <stargazer1@cox.net>
To: "Spridgets List" <spridgets@autox.team.net>
Sent: Wednesday, January 16, 2008 8:57 PM
Subject: [Spridgets] HS2 Float Lid Question


> Greetings O Learned Ones:
> 
> My son and I just mounted some newly rebuilt carbs on his desmogged '70 
> midget. We turned on the key, and have gas coming out the "spare" hose 
> connection on the rear carb. I don't remember us having anything on that 
> connection previously so I'm both puzzled and concerned by this sudden 
> production of liquid petrol. Did we get the carb lids swapped? The 
> emission control diagram seems to indicate that is normally a vent of 
> some sort that runs to the carbon cannister.
> 
> Thanks,
> Dave Ambrose
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as pasgeirsson@worldnet.att.net
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>