--===============0173084439==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
Content-Language: en-us
Lets see if I can word this right to possibly get an answer to the problem J
New roller ball bearings (thrust type) installed on the front hubs. Both
sides were installed 68 miles ago (i.e. races seated right and the spacer
inserted correctly. Now the drivers side still is the way it should be but
the passenger side has play in the hub. Checked that the nut was snugged
down and all looks correct. Any ideas on the problem and how to correct it?
Have heard before about shims being necessary sometimes but dont
understand that concept.Ideas and no I dont want to change to tapered
roller bearings <grin> if at all possible.
Oh yea..the car is a 1960 Bugeye (aka Iris)
Thanks
Leo
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.13/1375 - Release Date: 4/12/2008
11:32 AM
--===============0173084439==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
--===============0173084439==--
|