spridgets
[Top] [All Lists]

Re: [Spridgets] Floor Jack?

To: "Spridgets" <spridgets@autox.team.net>
Subject: Re: [Spridgets] Floor Jack?
From: "David Lieb" <dbl@chicagolandmgclub.com>
Date: Mon, 26 May 2008 08:23:00 -0500
And for a third Harbor Freight item, I use
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=91039
Be aware that, although Harbor Freight will tell you that they sell parts 
for their jacks, the selection is very limited, the local store has NONE, 
and it is generally cheaper to replace the jack than to repair it. What else 
is new? The roller on the back of mine that pushes on the hydraulic cylinder 
disappeared (accompanied by a loud springy noise... I found the other parts, 
but not the roller). After due consideration, the spacer from a Spridget 
front lowering kit was found to fit perfectly.
David Lieb 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>