spridgets
[Top] [All Lists]

Re: [Spridgets] Dipstick tube

To: jdc6@Lehigh.EDU
Subject: Re: [Spridgets] Dipstick tube
From: Weslake1330@aol.com
Date: Wed, 28 May 2008 15:45:02 EDT
The factory part number is 12G 107 which looks to be the plastic  tube.  
However, later engines have a steel tube for which I'm not able to  find a part 
number though clearly it's different.  The dipsticks are  specific to each type 
of tube and if you get it wrong then you get oil out of  the dipstick hole.  
US cars may be different again and had a dipstick with  a 45 degree bend on it 
while UK cars were generally straight.
 
I'd be interested in a steel tube if anyone is ever scrapping a block with  
one in it.
 
regards
 
 
Daniel
 
In a message dated 28/05/2008 20:19:31 GMT Daylight Time, jdc6@Lehigh.EDU  
writes:

_Weslake1330@aol.com_ (mailto:Weslake1330@aol.com)  wrote:  
 
Are new dip stick tubes available?  Also there are at least 2  types of tube 
and 2 or types of stick.
 
In a message dated 28/05/2008 17:42:53 GMT Daylight Time, _jdc6@Lehigh.EDU_ 
(mailto:jdc6@Lehigh.EDU)  writes:

A  new tube will fit
snugly in the block  hole.




Hi Daniel,
Yes Moss 451-430 is the  dipstick tube for 1098-1275.
John
Fogelsville,  PA
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>