[Spridgets] Diffy plug remover

To:	spridgets@autox.team.net
Subject:	[Spridgets] Diffy plug remover
From:	Bill L <pythias@pacifier.com>
Date:	Sun, 15 Jun 2008 07:50:22 -0700

Hello

          a piece of 7 /16" square stock welded into a 12 point
          socket, (1/2" ?) then bullnose the end with a grinder.
          perfect fit diffy plug remover... throw it in the toolbox
          and have one around.


          NOBODY sells one. MAC, PROTO, SEARS, SNAP-ON..

-- 
Best regards,
 Bill                            mailto:pythias@pacifier.com
 '66 Sprite HAN8L49403
      * "The prisoner escaped down a rope," said Tom condescendingly.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread]	Current Thread	[Next in Thread>
[Spridgets] Diffy plug remover, Bill L <= Re: [Spridgets] Diffy plug remover, Kitterer Bob Re: [Spridgets] Diffy plug remover, Billy Zoom

Previous by Date:	Re: [Spridgets] Engine pull, Frank Clarici
Next by Date:	Re: [Spridgets] Question re. Torque wrench with extension, Jim Johnson
Previous by Thread:	Re: [Spridgets] clutch slave, Gerard Chateauvieux
Next by Thread:	Re: [Spridgets] Diffy plug remover, Kitterer Bob
Indexes:	[Date] [Thread] [Top] [All Lists]