> Whitworth. ...really
But if Whitworth sizes are by the length of one flat, what is the
difference?
As Bill L noted, I have a ratcheting wrench from LBCarCo, Part number K10696
that has 3/16" and 1/4" on one end and 5/16" and 3/8" on the other end. I
believe it was really developed for some HVAC application, but Jeff found
them somewhere and stocks them for $13. MUCH easier to use than the
non-ratcheting ones and FAR superior to trying to round off the flats with
an open-end wrench.
David Lieb
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|