spridgets
[Top] [All Lists]

Re: [Spridgets] Sticking brake master

To: <Spridgets@autox.team.net>
Subject: Re: [Spridgets] Sticking brake master
From: <corvallis@peoplepc.com>
Date: Wed, 30 Jul 2008 09:18:04 -0700
Oh yes; the insides do go with all sorts of symptoms. ...bill in oregon

========================================================================
-----Original Message-----
From: spridgets-bounces+corvallis=peoplepc.com@autox.team.net
[mailto:spridgets-bounces+corvallis=peoplepc.com@autox.team.net] On Behalf
Of Brad Fornal
Sent: Wednesday, July 30, 2008 9:15 AM
To: Paul Baker
Cc: Spridgets
Subject: Re: [Spridgets] Sticking brake master

Front or rear? Do you think that perhaps the rubber flex lines could be
collapsing internally?

Brad

On Wed, Jul 30, 2008 at 11:12 AM, Paul Baker <paulbaker53@yahoo.co.uk>wrote:

> I hope you guys can help.
> I have a 65' Sprite with an 18 month old replacement
> brake master cylinder ( the single reservoir - brake/clutch combined).
Over
> the last few months the brakes will occassionallyB hold on for a few
> seconds
> after the brake pedal pressure has been released.B B The frequency of this
> problem seems to be getting more regular.B  There is free play at the
> clevis
> pin end of the of the pushrod and no binding at the pedal pin.B  The
master
> cylinder just does not want to release the pushrod for sometimes up to 3
or
> 4
> seconds.
> Any suggestions.
> Paul Baker
> __________________________________________________________
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>