spridgets
[Top] [All Lists]

Re: [Spridgets] pinking problem - actually clutch??

To: Spridgets <spridgets@autox.team.net>
Subject: Re: [Spridgets] pinking problem - actually clutch??
From: Marc <smarc@smarc.net>
Date: Mon, 04 Aug 2008 20:16:28 -0400
So, I went for a drive, and of course, I still hear the rattle at light 
throttle. Pulling in to my garage, I stop just part way in, wanting to 
check my alignment driving up onto the lift (not much room to spare 
between the lift's treads). Anyway, just happened to catch an echo off 
the wall of the garage - it's that damned rattle. Getting back into the  
car, I happened to ever so slightly depress the clutch and the noise STOPS.

A little experimenting and when I rev the engine to about 2800 rpm, I 
hear what I THOUGHT was pinking. Depressing the clutch pedal about inch 
& a half makes the noise subside...

Not great news, but at least it's not the engine...

As you may recall, I had a buttload of troubles with the new clutch, 
ultimately pulling it, and installing the old one. Then the problem with 
the smoking throw out bearing... solved (or so I thought) by shortening 
the pushrod a tiny bit...

Guess that saga isn't quite done yet...


Marc wrote:
> I took a small piece of aluminum rod, drilled a 1/16" hole thru it, 
> turned down the ends in a lathe so the vacuum line hoses would fit over 
> it, and that seems to have smoothed out the fluttering diaphragm on the 
> distributor.
>
> Gonna go for a drive and see about the pinking... Expect that probe will 
> still be there...
>
>   

-- 

Marc
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>