Robert,
Nice site : )
Lin
On Sat, Aug 9, 2008 at 9:04 AM, Robert Duquette <robertduquette@sympatico.ca
> wrote:
> My memory fails me, but someone here was having problems removing a broken
> stud ( from a seat belt rear well hump? ) and I passed on what someone once
> told me, though I had never tried it. The restorer suggested welding a
> bead
> on the end of the stud, wait a bit, weld a bead on the end of the bead,
> etc,
> until you had something that you could get vise grips onto. Then screw it
> out. The heat and cool recycling should have freed it up if it was seized.
> Here's a similar idea shown in a how-to video.
>
>
>
> http://www.expertvillage.com/video/11073_mig-welding-remove-broken-stud.htm
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as grunthaner@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|