Maybe a wire and two hose clamps and sandpaper the contact points; I can't
solder. ...bill
==================================================================
-----Original Message-----
From: spridgets-bounces+corvallis=peoplepc.com@autox.team.net
[mailto:spridgets-bounces+corvallis=peoplepc.com@autox.team.net] On Behalf
Of Michael Rowe
Sent: Wednesday, September 03, 2008 5:57 PM
To: Spridget Chat Group
Subject: [Spridgets] Grounding steering column
For a time while working on my horn wiring, I lost the ground connection
between the lower and upper parts of my inner steering column - at the
collapsing point with two plastic shear pins, not at the lower connection
(?pinion?). I thought I might have to solder a wire between the two parts.
Any other less hokey suggestions?
Michael Rowe
'74 Midget
Long Island, NY
_______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|