spridgets
[Top] [All Lists]

Re: [Spridgets] 4th gear locked out

To: Len Hansen <wallstreetlen@hotmail.com>
Subject: Re: [Spridgets] 4th gear locked out
From: John Caffrey <jdc6@Lehigh.EDU>
Date: Tue, 21 Oct 2008 11:26:48 -0400
Len Hansen wrote:
> I have a Rib cased gearbox behind a fresh 1275.  I have had the gearbox
> rebuilt and it shifted into 4th when it was out of the car.  I put it in the
> car and it will not go into 4th gear.  It feels like it hits a wall in the
> shifter.  I pulled the side case and could not really fix a thing.  I yanked
> the engine and gear box out of the car.  Of course that got me to fresh up the
> bearings and rings, and rebuilt the head.  Low miles since last total rebuild,
> but why not.  Anyway, the gearbox shifted into 4th outside the car.  I,
> without much thought, guessed I put the shifter securing plate on wrong.  So I
> put the springs in the holes on the side cover and stuck it back into the car.
> The motor is running great.  It did eject 1/2 quart of oil onto the garage
> floor after my first run.  I am thinking Crankcase ventilation and break in
> blow by. It does seem to be getting better. NOW PROBLEM.  The gearbox wont go
> into 4th gear again.  ANY IDEAS???  signed Desperate...
> _________________________________________________________________
>   
Len,
Did you have a look at the pilot bushing during the rebuild to see that 
it's not excessively worn? I am thinking there may be an alignment 
problem, and I might freshen the pilot bushing, and remove and reinstall 
the clutch.
Regards,
John
Fogelsville, PA
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>