spridgets
[Top] [All Lists]

Re: [Spridgets] A series crankshafts

To: spridgets list <spridgets@autox.team.net>, Michael Rowe
Subject: Re: [Spridgets] A series crankshafts
From: bv <bvsprite@yahoo.com>
Date: Wed, 10 Dec 2008 15:30:16 -0800 (PST)
OK, I haven't responded to one of these in quite a while...

When I rebuilt my 59 sprite, I wanted to build a rock solid 1275 for street
performance, and the results have worked out great. I strated with a stock
1275 from a 71 midget.
here's what I did:

-Kent MD266 cam which provides a smooth idle and plenty of power. (read the
reviews - even vizard likes it)
-12g940 head, and ported it myself to vizard's specs.
- .02 over Metro 8.8CR pistons,
-Sintered Metro lifters (yeah I know their heavy, but they're strong and 
worked out fine)
-crank pistons and fly-wheel dynamically balanced, at a local speed shop
-ARP rod, and head bolts
-maniflow headers, and custom fit RC40 exhaust system
-dellorto DHLA 40 (34mm venturies) K&N filter
-Pertronix ignitor  in stock 25d distributor
-3.9 rearend - Rivergate 5-speed, front disk brakes

This engine idles smooth and revs easily, and has plenty of low end torque,
which you don't get with a racing cam.
For example, I was out for a drive with a few other sprite owners, and one guy
had a 'race' cam and a DCOE45 on his 1275 sprite (very lumpy idle). When we
started up a windy mountain road (HWY 9 - santa cruz mountians), I easily left
the race-preped sprite in the dust. It seems he had to keep his engine revs
really high and stay in low gears to try and keep up (no low end torque).
Now I'm sure on a track, where you keep the car at 60+mph, he'd probably leave
me behind, but since I never run my car on a track, who cares?

BTW-  I've also run the stock dual SU hs2's which had pretty much the same
performance, however, you just gotta love that 'induction growl' from a weber
or dellorto sidedraft:-)


--- On Wed, 12/10/08, Michael Rowe <mdrowe@optonline.net> wrote:
From: Michael Rowe <mdrowe@optonline.net>
Subject: Re: [Spridgets] A series crankshafts
To: "spridgets list" <spridgets@autox.team.net>
Date: Wednesday, December 10, 2008, 9:22 AM

> I agree with the others. For the amount of power you are looking for,
> you NEED to talk to one or all of the names the others have given you.

OK.  There is no question about this for extreme upgrades.  But what if you
don't want an extreme racing engine,  just a really good street engine -
plenty of power, smooth-running, durable, etc.   Vizard is very clear about
balancing components, but there is so much information that it is hard to
sort
out intermediate levels of build.  On scanning, other books are similar,
although not as detailed.

How about it racers?  Is there a cookbook for building a level 3 engine (out
of
6) with mostly bolt-on components?

How about a list of parts:
1.  HIF6 carb with K&N filters.
2.  Titan intake manifold.
3.  Etc.

Michael Rowe
'74 Midget
Long Island, NY _______________________________________________
Support Team.Net  http://www.team.net/donate.html

You are subscribed as bvsprite@yahoo.com

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>