spridgets
[Top] [All Lists]

Re: [Spridgets] Carb dashpot oil.

To: "'Dean Hedin'" <dlh2001@comcast.net>, "'derf'" <derf247@gmail.com>,
Subject: Re: [Spridgets] Carb dashpot oil.
From: "Guy Weller" <guy.weller@tiscali.co.uk>
Date: Tue, 10 Feb 2009 08:54:21 -0000
Dean,
I knew all of that, but I have never seen it written down and explained so
clearly!
Succinct, accurate and logical!

Thanks!

Guy

-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net]On Behalf Of Dean Hedin
Sent: 10 February 2009 03:08
To: derf; Leo
Cc: David Ramsey; spridgets@autox.team.net
Subject: Re: [Spridgets] Carb dashpot oil.


It's not that simple.

There is no accelerator pump on an S.U. to enrich the mixture
as you go to a wide open throttle condition (like on a Holley or Webber)

SU's rely on the delayed rise of the piston to force enrichment
when the butterflys go wide open.   The delayed rise is a result of the
damper (and
naturally the viscosity of the oil in the damper).

So what happens is when the butterflys go wide open the engine trys to draw
more air.
but the piston will not go up instantaniously, so instead the engine draws
more fuel through the main
jet.   This enriches the mixture, which is what the engine needs to
accelerate.

So if you had too thin of oil (or none!) in the dash pots the pistons would
rise too fast, and
this would result in hesitation & bucking on acceleration.

As you go more viscous with the oil you will hit a sweet spot optimal for
throttle response.

Then when you go too heavy you will have slow engine acceleration and see a
puff of black smoke in the
exhaust as you goose the throttle.


----- Original Message -----
From: "derf" <derf247@gmail.com>
To: "Leo" <60bugeye@cebridge.net>
Cc: "David Ramsey" <dwramsey@att.net>; <spridgets@autox.team.net>
Sent: Monday, February 09, 2009 9:02 AM
Subject: Re: [Spridgets] Carb dashpot oil.


> Yes.
>
>
>> Am I correct on this...the heavier the viscosity used for the dashpot
oil,
>> the slower the response, the lighter the oil the faster the response???
i.e.
>> the higher the viscosity the greater the resistance to the slide rising
and
>> one up the heavier viscosity will slow the return to idle..no demand
>> state...?
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as dlh2001@comcast.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
You are subscribed as guy.weller@tiscali.co.uk

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>