tinydog sez:
Dumb Answer #1 - Yes ahead of the rear axle on the bulkhead behind the right
seat.
Dumb Answer #2 - Yes
Dumb Answer #3 - Yes
--- On Thu, 2/26/09, Jim F. <jimndi@frontiernet.net> wrote:
From: Jim F. <jimndi@frontiernet.net>
Subject: [Spridgets] Dumb Questions
To: spridgets@autox.team.net
Date: Thursday, February 26, 2009, 3:43 PM
Can somebody Help me.
Dumb Question # 1 . I am putting a 1970 mg 1275 engine in a 1960 BE. The 1275
has been recently totally rebuilt and bored to 1300 cc. I have the original
948 engine in the garage and it has an external mechanical Fuel pump. The
1275
has no pump or a place to mount one for that matter. Did the 1970 midget have
an electric fuel pump??
Dumb question # 2 I have 2 sets of Su Carbs, The one set is complete from
an
original 948. The other set is from a later 1275 and they are missing the
connecting rod between the throttle plates. Can I use the earlier connecting
rod on the newer carbs??
Dumb Question # 3. Is there anything special about the water outlet on the
1275? I am planning on using the Original downflow radiator. Is the 948 water
outlet interchangable with the 1275?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|