spridgets
[Top] [All Lists]

Re: [Spridgets] Hub Nut

To: <JMFarley50@aol.com>,
Subject: Re: [Spridgets] Hub Nut
From: "Paul Asgeirsson" <PAsgeirsson@worldnet.att.net>
Date: Thu, 12 Mar 2009 18:58:37 -0800
Hi John,

I use a 1 7/8" wrench on the lock nut.  Fits perfectly.  Make sure you have
the locking washer tab pounded back out of the way so the wrench will fit
over the nut.  Nuts sorta thin!

They are "handed" nuts on some cars so watch that.  It isn't always a case
of twist left for taking it off!

Paul A

----- Original Message ----- 
From: <JMFarley50@aol.com>
To: <spridgets@autox.team.net>
Sent: Thursday, March 12, 2009 5:41 PM
Subject: [Spridgets] Hub Nut


> Looks like the rear axle hub nut is a unique size on my bugeye.  None  of
my
> sockets fit. Looks to be between 1-13/16" and 1-7/8".  What have  folks
used
> to remove / install them?
>
> Also, what should be the torque when installing?
>
> Thanks,  John
> **************Worried about job security? Check out the 5 safest jobs in a
> recession.
>
(http://jobs.aol.com/gallery/growing-job-industries?ncid=emlcntuscare0000000
2)
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as pasgeirsson@worldnet.att.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets

_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>