Cool I'm going to try some rusty tools first then work my way up to a box of
extra sprite parts I have.
Does anyone know what materials can be put in? Can I put my extra carbs in
if so I'll take them apart but would every part go in? being I think the
carb parts are aluminium will they be OK or turn ugly black? What would you
guys use after you rinse oil product or polish or clear polyurithane?
Thanks Lin
On Sat, Mar 21, 2009 at 9:13 AM, <corvallis@peoplepc.com> wrote:
> This was 1967 and I was young. If a little time in carb cleaner is good, a
> long time is better. A few hours in my situation would have done. I left
> the
> case half in there overnight.
>
> Yes, I sense you could use a plastic container with the Evapo-rust product.
> .bill
>
> _____
>
> From: Linda Grunthaner [mailto:grunthaner@gmail.com]
> Sent: Saturday, March 21, 2009 6:07 AM
> To: corvallis@peoplepc.com
> Cc: spridgets@autox.team.net
> Subject: Re: [Spridgets] Rust Removal...made simple.
>
> Bill,
>
> Why wouldn't I use a plastic container? Also what do you mean by "Don't
> leave the block in there
> too long as carb cleaner" is this carburetor cleaner? And how long is too
> long?
>
> Herb how long did you leave items with rubber parts in?
>
> Thanks lin
>
>
> ----------------------------------------------------------------------------
> -------------
>
> On Sat, Mar 21, 2009 at 8:49 AM, <corvallis@peoplepc.com> wrote:
>
> The trick to dipping a block is to make a metal box that is just big enough
> to hold the block. I did this in the 1960's for half of a VW case. Had the
> box made at a sheet metal shop; HVAC people. Don't leave the block in there
> too long as carb cleaner, in my situation, etched the case at the fluid
> line; I filled box to half full and flipped the case around when the lower
> half was clean. ...bill in oregon
> =============================================================
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as grunthaner@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|