spridgets
[Top] [All Lists]

Re: [Spridgets] Tonneau studs

To: Bill L <pythias@pacifier.com>
Subject: Re: [Spridgets] Tonneau studs
From: CosmicMag1380 <cosmicmag1380@gmail.com>
Date: Wed, 25 Mar 2009 17:03:55 -0600
Actaully there are FOUR holes in the front, two for each half of the
tonneau.

    FWIW, the snaps to go onto the windscreen post are missing from
    the tonneau as well.... Still I picked it up for less than $60.
    It's red (or used to be) to match the car...

Best regards,
 Bill L.


Bill et al,

The 67 parts car that I will be sending the studs from has four studs
(posts) across the front of the dash cowl. These studs (or posts) are larger
in diameter than the Tenax (Lift the Dot) fasteners on the back sides of the
top. If my memory is any good, the fasteners are flat with a hole in the
middle and they have spring wires in them to clamp to the studs. There are
also snaps on each side of the inside of the windshield frame.

-- 
Kent
1960 Bugeye
1967 Sprite - following in the 73's footsteps to the boneyard...
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>