spridgets
[Top] [All Lists]

Re: [Spridgets] Radiator dent removal

To: <spridgets@autox.team.net>
Subject: Re: [Spridgets] Radiator dent removal
From: "Dean Hedin" <dlh2001@comcast.net>
Date: Sun, 19 Apr 2009 00:45:47 -0400
Got the radiator back from J&J.   Cost was $50.  The lead fills were not 
perfect, but I used a little JB weld
to hit some of the low spots.   Very happy with the results so far.  At this 
point the old paint is stripped off
and the fins have been straightened.  It gets paint tomorrow.

Some photos here...
http://tinyurl.com/dg9hmw
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>