spridgets
[Top] [All Lists]

Re: [Spridgets] Changing spring bushes and brake shoes...

To: "spridgets Net Spridgets@autox.team." <spridgets@autox.team.net>,
Subject: Re: [Spridgets] Changing spring bushes and brake shoes...
From: Lester <oldsaabguy@comcast.net>
Date: Wed, 29 Apr 2009 07:56:15 -0500
See, you are describing the way ALL of my SAABs work, there is a  
"nail" that protrudes through the backing plate, then a spring, then a  
cup.  Takes about 6 seconds to do or undo.

The Bugeye has none of that.  It has a spring that is coiled from  
bottom to top and instead of the top ending it is bent 90 degrees and  
travels back through the center of the spring so that it protrudes  
past the spring and then is bent into a "u".  This is pushed down  
through the brake shoe hole and the "U" catches on a bracket that is  
part of the backing plate.

VERY easy to install, you just push straight down and it hooks on the  
bracket.

Taking it out is a nightmare.  As you push down on the center part of  
the spring it hits the backing plate and is pushed farther under the  
bracket rather than being able to come out..

Thanks to all who have given suggestions, keep those cards and letter  
coming!

Lester


On Apr 29, 2009, at 7:03 AM, 72 Spridget wrote:

>> I'm talking about the brake shoe retaining springs not the two shoe  
>> to shoe springs..
>
> Oh those, I usually just put one finger behind the "nail", offer up  
> the spring and cup, and use a regular straight 2-position pliers  
> gripping the edge of the cup to push and turn it into place.  
> Sometimes just use my fingers. No big deal. The shoe to shoe springs  
> I hook up to both shoes, then pull the shoes into place. Spridget  
> brakes are so easy it is almnost criminal... one the adjuster gets  
> broken loose.
> David
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>