Does this same rule of thumb apply to everyone? There are many strengths of
beer and people's capacities vary. ie: for ED, would it still be 2? ;)
> Date: Thu, 25 Jun 2009 14:23:27 -0700
> To: smarc@smarc.net; spridgets@autox.team.net
> From: peter@nosimport.com
> Subject: Re: [Spridgets] clamp on line?
>
> Easier and safer for the line is to fill the MC completely, stretch a
> plastic bag over the mouth and tighten cap back on. You have now "put
> your thumb on the straw" and fluid wont leak.... much. The install
> slave, open bleeder and walk away whilst imbibing a beer. It'll be
> bled by the time your done with your second.
>
> Peter C
> =====
>
> At 11:44 AM 6/25/2009, Marc wrote:
> >I want to change a slave cylinder - Can I clamp the hose to prevent
> >losing all the fluid without damage to the hose?
> >
> >--
> >
> >Marc
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|