spridgets
[Top] [All Lists]

Re: [Spridgets] Gasket Sealer for Intake and Carburetor gaskets?

To: Spridgets <spridgets@autox.team.net>, Buster Evans <b-evans@earthlink.net>
Subject: Re: [Spridgets] Gasket Sealer for Intake and Carburetor gaskets?
From: Jim Johnson <bmwwxman@gmail.com>
Date: Mon, 6 Jul 2009 16:25:33 -0500
I'm with Frank.  About the only stuff I'd ever put there would be Hylomar
which doesn't set up hard, stays tacky and is easily removed. As long as
your carb flanges and intake manifold are not warped you shouldn't need
anything in there.

Cheers!!
Jim

On Mon, Jul 6, 2009 at 4:12 PM, Frank <spritenut@comcast.net> wrote:

> EXT-Love, Charles M wrote:
>
>> Hello All;
>>
>> What kind of sealer do you recommend for putting the carbs and intake
>> back together.
>>
>>
>>
>>
> None.
>
>
> --
> Frank Clarici
> Toms River, NJ
> My own Fleet of Sprites
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>