spridgets
[Top] [All Lists]

Re: [Spridgets] FW: Picklex for rust before priming no prep steps

To: corvallis@peoplepc.com
Subject: Re: [Spridgets] FW: Picklex for rust before priming no prep steps
From: Linda Grunthaner <grunthaner@gmail.com>
Date: Sat, 1 Aug 2009 15:11:00 -0400
Bill,Is the Picklex20 the same thing? I was on the site
http://picklex.com/home.html
Lin?

On Sat, Aug 1, 2009 at 8:02 AM, <corvallis@peoplepc.com> wrote:

> I emailed them at picklex.com
>
> They say they have an online store at www.picklex20.com
>
> .bill in oregon
>
>
>
>  _____
>
> From: corvallis@peoplepc.com [mailto:corvallis@peoplepc.com]
> Sent: Friday, July 31, 2009 5:45 PM
> To: 'spridgets@autox.team.net'
> Subject: RE: [Spridgets] Picklex for rust before priming no prep steps no
> rinse
>
>
>
> Thank you. I'll look thru their site again. .bill in oregon
>
>
>
>  _____
>
> From: Linda Grunthaner [mailto:grunthaner@gmail.com]
> Sent: Friday, July 31, 2009 5:39 PM
> To: corvallis@peoplepc.com
> Cc: Spridget list
> Subject: Re: [Spridgets] Picklex for rust before priming no prep steps no
> rinse
>
>
>
> This website sells it I talked to the salesmen today, takes credit, paypal
> and others.  <http://picklex.com/home.html> http://picklex.com/home.html
> It costs $60. a quart but I think it worth a try.
> I just called about my ppg primer and being it is not an acid base I can
> use
> Picklex so I'll order some this weekend or Monday.
> Lin
>
> On Fri, Jul 31, 2009 at 8:14 PM, <corvallis@peoplepc.com> wrote:
>
> No one sells it. ...bill in Oregon
>
> ===========================================
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as grunthaner@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>