Yes it can be done, just use a piece of plywood bigger than your
floor jack pedestal up against your oil pan and raise the engine and
trans in unison.
Dave
P.S. You will have to take off the engine mounts and possibly the
exhaust manifold/pipe connection for this operation to function correctly.
At 03:48 PM 8/1/2009, you wrote:
>I'm planning a sequence of things I'd like to do on The Beast...
>i.e. changing the head (suspect bad intake valve guide on #3),
>install silicon rocker cover gasket (current cork one weeps oil),
>installing the silicon hoses (just because I like the color...) and,
>if possible, changing the timing chest cover (got one with the oil
>separator on..).
>The last item makes me ask the big question :- can the crank pulley
>be removed without pulling the engine??
>
>--
>Dave G. KK7SS
>'65 MK III Sprite in Richland, WA
>
>If I wake up in the morning, and I hurt, it means that I'm still
>alive !!
>__________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|