spridgets
[Top] [All Lists]

Re: [Spridgets] Picklex for rust before priming no prep steps no

To: Linda Grunthaner <grunthaner@gmail.com>
Subject: Re: [Spridgets] Picklex for rust before priming no prep steps no
From: WFO Herb <froggi60@gmail.com>
Date: Sat, 1 Aug 2009 16:52:42 -0700
August issue of Grassroots Motorsports has an article titled "Rust
Recovery"; pg 101.
Decent article, they include POR 15. ("better")

Their pick for "best" was Skco's OSPHO.

Their pick for "ideal", of course was metal replacement.

Herb



On Fri, Jul 31, 2009 at 12:08 PM, Linda Grunthaner <grunthaner@gmail.com>wrote:

> I just got a cool tip from my other car guys about Picklex
> http://picklex.com/home.html which sounds as good as POR-15 but better and
> no steps needed and no water applied. I called the company and this stuff
> can be sprayed or brushed then ether wipe off the powder or air off. Then
> prime or paint. The site shows photo examples time tested. The only thing
> you have to be careful of is that you can't use an acid based primer or
> that
> funky green primer that Frank uses (I for the type but it is not sandable).
> I'll give it a try on my non British vehicle and post results.
> Lin
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as froggi60@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>