The key here is gently. When I did mine, I got a little impatient (and a
little medieval), and ended up cracking the paint around the wheel arch.
OTOH, the tires didn't rub anymore.
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
============================
I was just reading a couple of days ago that gently heating the arch with a
heat gun to about 160 degrees will help to keep the paint from cracking.
Use an infrared pyrometer so you don't overheat it.
And, yes, just as Chris also said, gentle is key here. They mentioned
rolling the bat back and forth and not trying to bend more than a tenth of
an inch at a time.
LAD
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|