Some people have put 4x100 wheels on a Spridget. I think that there is a
danger of the lug studs bending to get them to fit.
Miata wheels in particular have a pretty high offset, so they may not
fit even if you get them over the lugs. If you want to try this, you're
better off with BMW or old Toyota wheels. However, that high offset
means you might be able to fashion an adapter from 4x4 to 4x100...
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
From: brian S [bugeye15@hotmail.com]
Sent: 11/18/2009 12:49:46 PM
To: spridgets@autox.team.net
Subject: [Spridgets] 14 inch Miata wheels
Has anyone tried, or is there anyone with a 1st generation Miata
that could see if the 14 inch Miata wheels fit a spridget?
>From what I've seen, they are 4x100 lug spacing, (slightly less than
4x4)
and 14x5.5 or 6 inches wide.
If the center hole is big enough, seems like a go.
Brian S.
Bugeyeracer finally resto'ed!
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141665/direct/01/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
You are subscribed as cbking@alum.rpi.edu
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|