Trusting my memory, I believe that the Denis Ferranti works made all
the original hardtops for the MG cars, better known for the HT's for
the B's, the factory was at Angelsey.
The original hardtop that came from the factory with my MGB was from
the Ferranti company.
And when the spridgets came along, these were intially produced at the
LLangefni works, along with hardtops for all other british, european
and american cars.
The ferranti HT's were f/g and chrome fittings to closely match a
standard sedan look.
2009/12/9 Bill L <firstname.lastname@example.org>:
> Hello Phil,
> Those are the same brand markings that are in my factory
> BUT... no top fits all the years he describes.
> 62 -> 64 is one kind,
> 65 -> 66 is another,
> 67-> is yet another...
> the picture in the lower right corner isn't clear enough for me
> to be able to tell if there is a "notch" or if the bottom runs
> smoothly all the way around.... if it's notched, it's for 65,66,
> if smooth for a later car..... I don't think it's for an early
> one, as some of that type also fit a BE, and front clip would be
> different... I may be wrong on that last bit, being unfamiliar
> with the MK I Midget tops..
> my best guess is that it's a late model one.. it sure looks
> smoooth (EVEN) all the way around the bottom....
> Best regards,
> Bill L. mailto:email@example.com
> '66 Sprite MKIII HAN8L49403 "the red thing"
> Things worth having are worth cheating for.
> Support Team.Net http://www.team.net/donate.html
> You are subscribed as firstname.lastname@example.org
Support Team.Net http://www.team.net/donate.html