--- On Fri, 2/12/10, Frank <spritenut@comcast.net> wrote:
> I had the cam advanced a little and my car ran great
> throughout most of the range.
> However, I had no power pulling hills and a hard time
> hitting 90 mph.
Frank,
Makes sense. Advancing the cam shifts the torque curve downward - should be
more low end torque, less top end. 4 degrees sounds like a lot, +/- 2 degrees
is all the variability recommended for the one I have in White Trash. Also
check if Kent recommends any change in valve clearances for the cam if advanced.
Ron
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|