Leo- From Vizard's book- Pin drive cam with two rings was a 12G165 cam used on
1100 cc MKII sprites. Cam Lift-0.250" intake and exhaust, timing 2300 intake,
2520 exhaust. Intake opens at 50BTDC, closes at 450ABDC, Exhaust opens at
510BBDC, closes at 210ATDC. Lobe angle 107.50, clearances-0.012". Intake
should be at full lift (0.250") at 1100ATDC.
Cheers,
Mark Haynes
HAN6L12779
HAN5L8016
____________________________________________________________
Diet Help
Cheap Diet Help Tips. Click here.
http://thirdpartyoffers.netzero.net/TGL2231/c?cp=a6hmFbEx0NkKB2mY5CDN7QAAJz5X
oFCg_GoYpsOBXA-_r2I8AAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAYQAAAAAA=
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|