RUST REMOVAL "THE LATEST SECRET"
____________________________________
I AM NOT PROMOTING A PRODUCT JUST TRYING TO HELP FOLKS LIKE ME
OK LADIES, IF THIS HAS BEEN COVERED HERE BEFORE PLEASE FORGIVE ME. AS AN
OLD CAR JUNKY I HAVE BEEN DEALING WITH RUST ABOUT 40 YEARS. FIRST OFF THERE IS
NO SUBSTITUTE FOR BLASTING BUT IN AREAS WHERE YOU JUST CAN'T BLAST WHAT DO
YOU DO? SHEET METAL LAP JOINTS & SEAMS, INSIDE POCKETS & CLOSED SECTIONS OF
FRAMES OR THE INSIDE OF GAS TANKS. ANY PLACE WHERE YOU JUST CAN'T GET THE
BLAST MEDIA I HAVE TRIED JUST ABOUT ALL THE "MIRACLE" RUST REMOVAL PRODUCTS
OUT THERE, ACIDS, MOLASSES, VINEGAR ETC. ETC. SOME WORK, SOME CAN COST
$55/GALLON. THE ONLY WAY TO REMOVE RUST IN THESE SEALED AREAS IS TO SUBMERGE
THE
PART IN A LIQUID SOLUTION OF "SOMETHING SAFE & CHEAP".
**THE SECRET**
FIND A TRACTOR SUPPLY STORE IN YOUR AREA, PURCHASE A GALLON
MILKSTONE ACID RINSE. THIS IS A MILD SOAP CONTAINING PHOSPHORIC ACID & IS
USED TO SANITIZE MILKING MACHINES. PHOSPHORIC ACID IS VERY MILD, IS WHAT
BURNS YOUR THROAT WHEN YOU DOWN A SOFT DRINK A LITTLE TO QUICK SO IT IS SAFE. A
GALLON WILL SET YOU BACK $8 & CAN BE MIXED WITH UP TO 10 GALLONS OF WATER.
I HAVE BEEN USING THE SAME 40 GALLON MIX IN A PLASTIC BARREL DIP TANK
FOR OVER A YEAR & IT IS STILL AS EFFECTIVE AS IT WAS THE DAY I MIXED
IT. IT WILL REMOVE THE HEAVIEST RUST YOU CAN THROW AT IT IN A COUPLE HOURS
TO A FEW DAYS. ONCE THE RUST IS GONE ALLOW THE PART TO AIR DRY & IT WILL BE
PROTECTED FROM FUTURE RUST BY A FINE WHITE PHOSPHORUS COATING WHICH CAN BE
RINSED OFF WITH A WATER HOSE BEFORE PAINTING.
ANY QUESTIONS PLEASE FEEL FREE TO FIRE AWAY I WILL TRY TO ANSWER
*** AGAIN I AM JUST TRYING TO ADD A LITTLE SOMETHING TO THIS FINE
GROUP *** I HAVE NO TIES WITH TRACTOR SUPPLY OR MILKSTONE
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|