spridgets
[Top] [All Lists]

Re: [Spridgets] question re: Spridget hood.

To: "DAVID GROPPER" <kk7ss@verizon.net>, <spridgets@autox.team.net>
Subject: Re: [Spridgets] question re: Spridget hood.
From: "Richard Ball" <richb@u.washington.edu>
Date: Sun, 14 Mar 2010 18:51:23 -0700
Dave

Remember, I have a '69 hood that I picked up for you last spring.  It's here 
at my place in Everett.  It may need a little work, but it was free.

Rich Ball
'76 Midget
Everett, WA

From: "DAVID GROPPER" <kk7ss@verizon.net>
To: <spridgets@autox.team.net>
Sent: Sunday, March 14, 2010 11:11 AM
Subject: Re: [Spridgets] question re: Spridget hood.


> John,
>
> Thanks for the link. I had a look and, wow, there's a lot of different 
> types.
> The holes are less than 3/8" diam. and are not slotted. But there are 
> 'blind' in the semse that I can't get behind the sheet metal   ;-(
> Any recommendation as to which one I should use for use in sheet metal?
>
> Dave G.
>
>
>>
>>From: fastvee <fastvee@yahoo.com>
>>
>>
>>If the hole is not slotted, and is 3/8" or less in diameter, you can use 
>>nut inserts. There is an insertion tool required, but I have always made 
>>my own tool for the smaller sizes. They hold very well when installed 
>>correctly.
>>http://www.mcmaster.com/#threaded-inserts/=67ripo
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/spridgets/richb@u.washington.edu
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>