My bugeye is fitted with the later (67) pedal box. In looking at the only
photos that I have with me the forward edge of the pedal box flange is against
the wheel well spot welded seam. As I recall that was as far forward as I
could get the pedal box - - which is mounted on an adapter plate. Do not
remember the details of the inside of the pedal box so no comment on any
possibilities there.
Bob Kitterer
1960 Austin Healey Sprite (Mk IV in disguise) - in storage
1966 Austin Healey Sprite Mk III (Trevor) - still in boxes - in storage
2000 Miata Special Edition - in storage
On Apr 25, 2010, at 2:10 PM, WeslakeMonza1330@aol.com wrote:
> Has anyone modified a pedal box (late type) or pedal box position so as to
> move the pedal position foward relative to the driver?
>
> Moving the pedals foward to the driver would allow the seat to go further
> back and thereby allow a straighter arm position.
>
> So, anybody done this and how, preferably with photos (to me not the list).
>
> Thanks
>
> Weslake-Monza 1330
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/spridgets/bkitterer@mac.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|