spridgets
[Top] [All Lists]

Re: [Spridgets] [midgetsprite] looking for seat bolt spacing

To: midgetsprite@yahoogroups.com, Spridgets Bugeye <spridgets@autox.team.net>
Subject: Re: [Spridgets] [midgetsprite] looking for seat bolt spacing
From: fastvee <fastvee@yahoo.com>
Date: Sun, 16 May 2010 15:00:25 -0700 (PDT)
Hello Gerard,
I measured my 67 which I believe to be the same, it came to me with later
seats in it. I butted the tape up against the cross member and measured
9-7/16" to the center of the front holes, and I get 12-1/2" between hole
centers. Weld nuts under the floor pan for the rear holes, and just clearance
holes in the pan for the front holes.
John
Fogelsville, PA







 



  


    
      
      
      Can anyone provide me with an
accurate measurement (center to center)

of the hole spacing for the two seat rail bolt holes in the floorboard

(front to back) of a '68 or '69 Spridget? Later cars of probably the

same, but I'm not positive. I also need the distance from the frame

crossmember to the first (front) hole. The left outside pair should be

sufficient, as I believe they are all the same spacing.
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Spridgets] [midgetsprite] looking for seat bolt spacing, fastvee <=