spridgets
[Top] [All Lists]

[Spridgets] Question Speedo Cable

To: spridgets@autox.team.net
Subject: [Spridgets] Question Speedo Cable
From: Kirk Hargreaves <khargreaves2@gmail.com>
Date: Sat, 22 May 2010 19:09:16 -0700
When I changed out the smooth case to a rib case I lost my speedo.  The
cable will turn the speedo when attached to an electric drill. .  but does
not want to "shake hands" with the gear box.   It is tightened in as far as
it will go.

So I would take from this that I need a different cable, ie. one that will
match the rib case gear box. .  and also match the back of the speedo dial.


I guess that the smooth case cables had a different engagement situation as
they are screwed into the gear box compared to the rib case.

Or.  . I could hook my cordless drill up to it and attach a vacuum line from
the engine to pull the variable speed trigger on the drill.  . and try to
dial it in so that it is as close as possible to the correct speed?
Probably be easier to replace the cable. .

Kirk
59 1275
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>