spridgets
[Top] [All Lists]

[Spridgets] Flasher question

To: Spridgets <Spridgets@autox.team.net>
Subject: [Spridgets] Flasher question
From: Frank Clarici <spritenut@comcast.net>
Date: Sun, 05 Dec 2010 11:27:11 -0500
68 Midget, padded dash, 2 prong flasher.
The external signals all work fine, they blink but the inside indicator 
bulbs do not blink.
The bulbs have been tested and work but not when the signals are turned on.
What controls the inside indicator arrow lamps? the wiring is the same 
color as the external bulbs and the diagram shows they are just tied 
into the external lamp wires.
So why only the external lamps light up?
I have tried a couple of different flasher units because I know the 
early cars use the flasher (3 prong) to power the single dash indicator 
lamp.
Or do the later cars go thru the hazard switch which I bypassed on this 
car for now. I know the hazard has it's own flasher.
-- 
Frank Clarici
Toms River, NJ
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>