spridgets
[Top] [All Lists]

[Spridgets] Sprite Top Parts

To: spridgets@autox.team.net
Subject: [Spridgets] Sprite Top Parts
From: "Mark Haynes" <haynes386@netzero.net>
Date: Mon, 3 Jan 2011 20:07:13 GMT
Jim- I didn't see anyone supply exact dimensions for the front of the MKII, so
here goes. As Frank said, the rear pieces can be made from pieces of steel
about 4" long, 1/8" thick and 1" wide (they also fit the tonneau), about
October time frame, Frank (or someone) measured their front insert for the MKI
(after SN 5877) & MKII hood attachments, the dimensions are: 9/16" wide, 36
1/4" long and 1/16" thick with rounded ends.
Hope this helps,


Mark Haynes
HAN6L12977
HAN5L8016

____________________________________________________________
Mortgage Rates Hit 2.99%
If you owe under $729k you probably qualify for Gov't Refi Programs
http://thirdpartyoffers.netzero.net/TGL3231/4d222c7a252f59c7940st02duc
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>