spridgets
[Top] [All Lists]

Re: [Spridgets] KIng Pin Reamer

To: Frank Clarici <spritenut@comcast.net>
Subject: Re: [Spridgets] KIng Pin Reamer
From: dlancer7676@comcast.net
Date: Sat, 15 Jan 2011 23:21:24 +0000 (UTC)
And of course a BF Hammer, Frank.B  8^)

--David C.
THE SENILITY PRAYER : B Grant me the senility to forget the people
B I never liked anyway,
B The good fortune to run into the ones I do, and
B The eyesight to tell the difference.




----- Original Message -----
From: "Frank Clarici" <spritenut@comcast.net>
To: "James Gruber" <thistle_3619@yahoo.com>
Cc: "Spridgets Digest" <spridgets@autox.team.net>
Sent: Saturday, January 15, 2011 5:36:30 PM
Subject: Re: [Spridgets] KIng Pin Reamer

On 1/15/2011 3:29 PM, James Gruber wrote:
> Anyone have a King Pin Reamer available?

Any machine shop can do this, you do NOT need the double reamer.
My shop does it no problem.
He reams the small bushing first after he puts it in a jig, them changes
reamers and does the bigger bushing.
And I have seen this done in the garage with a piece of sandpaper and a
wooden stick at the Buster Cluster. I won't mention WHO did it but it
worked.


--
Frank Clarici
Toms River, NJ
Suggested annual donation B $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/dlancer7676@comcast.net
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>