spridgets
[Top] [All Lists]

Re: [Spridgets] No LBC- elec motor wiring

To: Frank Clarici <spritenut@comcast.net>
Subject: Re: [Spridgets] No LBC- elec motor wiring
From: derf <derf247@gmail.com>
Date: Tue, 15 Mar 2011 20:05:32 -0500
Here is one possible scenario to think about:

Wire 1 and 6 go to hot and neutral power, should not matter which goes to which.

Wires 2-5 might go something like this:

2 and 3 connect to each other and 4 and 5 connect to each other to
make the motor go CW

2 and 4 connect to each other and 3 and 5 connect to each other to
make the motor go CCW

If the switch has jumpers that go diagonally from corner to corner
than this is probably the case.
Switch wires sound like whatever color the wirer had convenient.

Again, pics might be good.  Any brand on the motor?
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>