spridgets
[Top] [All Lists]

[Spridgets] Bearing Replacement Follow Up

Subject: [Spridgets] Bearing Replacement Follow Up
From: soavero at yahoo.com (Ron Soave)
Date: Tue, 29 Mar 2011 21:58:17 -0700 (PDT)
Best thing to do is have a good machine shop set it up with a feeler gauge and
pin it. No way 3 sloppy bolt holes will do it.None of it really matters if the
crank isn't true and a proper align hone hasn't been done. And don't get the
impression that I bat 1.000 on this - you are at the mercy of the machinist
and the parts to some extent. Paul A.'s seal kit works well.

--- On Tue, 3/29/11, Shop at " Just Brits " <shop at justbrits.com> wrote:

From: Shop at " Just Brits " <shop at justbrits.com>
Subject: Re: [Spridgets] Bearing Replacement Follow Up
To:
Cc: spridgets at autox.team.net
Date: Tuesday, March 29, 2011, 10:35 PM

<< It is semi adjustable with the 3 bolts and just when you know it's
perfectly flat and tighten the bolts, it moves. >>

GOSPEL !!  As sure as God made little green apples !!!!

Then after 2nd - 3rd 'try' you 'decide' to "fudge" it just a WEE bit
KNOWING the damned thing is GONNA move right where it needs to
be, right ???

Not a chance in He|| !!  NOW it stays put <sigh> !!!!!

Ed
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/soavero at yahoo.com

<Prev in Thread] Current Thread [Next in Thread>