I know that we have discussed the rear ratios on many occasions and I
did look over the archives first. I also looked on Gerard's website
but did not find what I found in a parts car... I pulled the pig today
and checked the stamping on the ring gear. It is marked 8/30 which, if
my math is right, means a 3.75 :1 gear ratio. It was obviously
tinkered with as there was a silicone sealer gooped all around the
gasket. Any ideas of what this gear may have come from?
--
Kent
1960 Bugeye
1967 Sprite - following in the 73's footsteps to the boneyard...
|