Re: [Spridgets] brake bleeding

[WeslakeMonza1330@aol.com]

Or if like me you don't have a compressor you fit a bicycle valve to a  
spare master cylinder cap and use a bicycle pump!
 
In a message dated 10/05/2011 05:03:11 GMT Daylight Time,  
dlh2001@comcast.net writes:

One way  to "power bleed" is to find a rubber stopper that fits tightly
over the  master cylinder fill hole.  You then drill a hole in the stopper
such  that you can fit it to an air blow gun attachment.
Fire up the compressor  and set the regulator to a few psi.
Check the master fluid level often as  you proceed.

Worked for me.
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums