The spacer keeps you from overloading the bearings. Without the spacer, when
you tighten the axle nut, there is nothing to keep from pulling the bearings
together and wearing the inside of the races. - Jim
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Dave KK7SS
Sent: Friday, May 20, 2011 10:53 AM
To: spridgets_autox.team.net
Subject: Re: [Spridgets] Bearing spacer, front hubs
It's been my understanding that the spacer forms an integral part of the
stress design of the front hub.
Mechanical design indicates that the axle is supposed to be stronger with
the spacer.
--
Dave G KK7SS
DN06ig Richland, WA
'59 Morris Minor 1000
'65 Sprite - in process
'76 Midget - shared with my #4 son.
'06 Honda Civic Hybrid
----- Original Message -----
From: "Charles M EXT-Love" <Charles.M.Love2@boeing.com>
I am replacing the bearings in the front hubs of my 73 and I was wondering
why the spacer is needed.
_______________________________________________
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|